500B Type Automatic Wire Bunching Machine
|FOB Price:||US $22,000-200,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $22,000-200,000/ Piece|
- Model NO.: 500B
- Certification: CE, ISO
- Heating System: Electric
- Mould Life: >1,000,000 shots
- Condition: New
- Warranty: 24 Months
- Twist Direction: Left and Right Can Freely Selected
- Trademark: HD
- Specification: CE
- HS Code: 8501320000
- Precision: High Precision
- Demoulding: Automatic
- Function: High Temperature Resistance
- Automatic Grade: Automatic
- Customized: Customized
- Method of Main Shaft Lubrication: Oil Lubricating, Natural Circulation Cooling
- Polish Rod Traverse: 15-30mm
- Transport Package: Wooden
- Origin: Changzhou, Jiangsu
B type magnetic powder clutch to control tension. Automatic tracing adjustment after setting roll diameter ratio, all the drive by synchronous belt.
Application: Copper twisting
Features of machine:
1. Max. Speed of main axis is 3000RPM.
2. Automatic tension control: When wire twisting, the take-up tension needs to increase after take-up receives full bobbin from the bobbin bottom. The machine can automatic tracking and adjust the take-up tension, to make the take-up tension of the overall bobbin in consistency, meanwhile, the machine can also adjust the take-up tension without stop.
3. The main axis is natural circulation cooling of oil lubrication, which can prolong the service life of machine.
4. The wire guiding system is the latest structure and the conductor is directly connected to the bow belt from main axis conduction, which reduced the bruise and strand jumping phenomenon caused by the angle conduction faults on the aluminum bobbin.
5. All the B type machine adopts the synchronous belt drive, lay of precision, without lubricating point in the wire guiding system and it is clean, thus, can not due to add oil produce second wire and wear wire.
6. Simple operation: Only changed a capstan wheel when change the lay, reversing only to turn the reverse rod by hand.
7. Adopt advanced control method: The working procedure is controlled by double-frequency device and PLC. Different switch doors, internal and external wire-broken, the oil bit of the main axial and others all owns corresponding indication lamp instrument to monitor and indicate the operation status.
8. Convenience for management: All the automatic tension adopts code switch for adjustment and the user can compile the corresponding process files according to the code switch value to ensure the mass quality of the twisted wire.
9. Material and machining process of super high speed automatic wire twisting machine, pair twisting machine main axis for wire twisting machine performance have very large influence, a good wire twisting machine is running noises and vibration value should be conform to the standard, can not too high, under the main axis is bad, the vibration will increase when the machine is running, and the bearing damage rate will rising, so Handing according to the years of experience, continuous improving quality of main axis, in order to make the machine achieve the best condition.
HD-? 250B-? 300B-? 400B-? 500B-? 630B-? 800B super high speed automatic wire twisting machine is suitable for computer traverse, earphone cable, electronic wire, telephone cable, automotive wire, network cable and copper twist.
|Max rotate speed||3000rev/min(6000twist/min)||3000rev/min(6000twist/min)||2000rev/min(4000twist/min)||1500rev/min(3000twist/min)|
|Twisting||Suitable for above seven strand of the silver jacketed wire, tinned wire, enamelled wire, bare copper wire, copper-clad steel, copper cladding aluminum|
|Feed wire diameter||φ0.05-φ0.28mm||φ0.08-φ0.45mm||φ0.18-φ0.62mm||φ0.38-φ1.4mm|
|Twisting area||0.035-0.45mm 2||0.035-2.5mm 2||0.18-6.0mm 2||2.5-16mm 2|
|Lay length||10 Segment, 3.65~17.15mm||40 Segment 6.3-50.4mm||34 Segment 11.6-100mm||30 Segment 29.7-157mm|
|Twist direction||Left and right can freely selected|
|Take-up bobbin||Standard ABS bobbin:Outer diameter φ300x outer width180 x inner width 150x inner holeφ40mm|
Standard ABS bobbin:Outer diameter φ500x outer width300 xinnerwidth250 xinner holeφ56mm
|Standard ABS bobbin:Outer diameter φ630 x outerwidth60 x inner width 300x inner holeφ80mm||Standard ABS bobbin:Outer diameter φ800x outerwidth600 x inner width 500x inner holeφ80mm|
|Polish rod traverse||φ15mm||φ20mm||φ30mm||φ30mm|
|Center height of main shaft||630mm||700mm||850mm||950mm|
|Method of main shaft lubrication||Oil lubricating, natural circulation cooling||Butter lubricating|
|Brake||-||Adopt Japan original enter port brand NSK Electromagnetic brake|
|Bearing||Electromagnetic brake, B type inside the brake by magnetic powder clutch automatic adjustment|
|Take-up tension||Use 0.6kg Magnetic clutch||Use 1.2kg Magnetic clutch||Use 5kg Magnetic clutch||Use 10kg Magnetic clutch|
|Protection||Inner and outer broken-wire automatic brake, meter count arrived will automatic shut-down|
|Safety protection||All the doors can be opened, and lifting no place can not start or automatic braking|
|Instruction||Machine state, have corresponding fault should indicator instructions|
|Control||By PLC + converter control|
|Noise figure||About 75db||About 80db||About 75db||About 75db|
|Main motor power||4KW||5.5KW||7.5KW||15KW|