Basic Info.
After-Sales Service Provided
Engineers Available to Service Machinery Overseas
Application
Wire and Cable
Place of Origine
Jiangsu China(Mainland)
Color
Provided by Costumers
Product Description
1. Scope of Application: The joint application between wire extruder unit and wire-feeding frame enable the realization of continuous coiling. (wire feeding , wire pressing, wire arranging, lap making, wire cutting, lock coiling, and feed coiling can be finalized at the same time)
2. Performance Specifications:
2.1. Power: AC 380V, three-phase, 50HZ (China), or to be designated by the customer.
2.2. Operating direction: right-hand machine (incoming line from the left-hand direction) or to be designated by the customer.
2.3. Applicable cable types: φ1-φ10MM electronic cords, computer cords, electric cords, BV/AV power lines, and building lines.
2.4. Design speed of the work head: 780RPM/MAX.
2.5.Wire coil dimension: Outside diameterΦ460mmMax, height50-120MM;the inside diameter of wire coil is determined by the work head specification, and its scope of specification is: φ140-φ220MM (fixed dimension),the patterns are to be selected by the customers. Special designs should be made for the dimensions beyond the scope of specification, and it is up to our company to decide their feasibilities.
2.6. Wire-feeding mode of finished products: cord-embracing mode.
2.7. Size measurement set: unit of size measurement is 0.01M,predicate the flow from automatic deceleration to automatic work head action.
2.8. Winding displacement unit: servo motor is applied in the winding displacement, synchronizing with the main machine of work head.
2.9.Electrical circuit control is applied in the whole machine. PLC from Delta is applied.
2.10. Graphic Operator Interface is applied in the operating panel.
2.11. Instrumentation and switches on the operating panel: Adjustments of touch screen, speed control button, emergency switch, and speed can be realized on the touch screen and the speed-adjusting button.
2.12. The contact points of Power Frequency Electric discharge Machine (EDM) are reserved in the PLC of this machine (Power Frequency EDM is to be self-supplied by the customers). It is applied in the spark detection of BV cord. It can realize the automatic breakdown point or continue to possess the function of loop formation after the artificial marking.
2.13.The contact points of diameter gauge are reserved in the PLC of this machine (diameter gauge equipment is to be self-supplied by the customers). In case the diameter fails to reach the standard, it is possible to automatically remove the scrap wire or continue to possess the function of loop formation after the artificial marking.
3.Components:
3.1.Length counter-------------------------- 1 set
3.2.Wire/cable feeding rod----------------- 1 set
3.3.Gate type Cutter------------------------- 1 set
3.4.Coiling plate & coiling head----------- 1 set
3.5.Traversing system----------------------- 1 set
3.6.4 arms carrier (Optional)--------------- 1 set
4.Detail Specification:
4.1.Length Counter:
4.1.1. pulleys are used for length counting.
4.1.2.Upper one press wire tightly when wire passes through the counter.
4.1.3.An encounter is connected to the lower counting pulley for counting length.
4.1.4.Both 2 pulleys are made of aluminum alloy, and coated with ceramic.
4.1.5.Both pulleys are equipped with a one way clutch to prevent the wire to be drawn back.
4.1.6.Precision of measurement: ±3/1000.
4.2.Coiling Head:
4.2.1.Horizontal coiling wire from an extrusion line or from a pay off wire feeding line.
4.2.2.Automatically putting down & raising up by a pneumatic pusher. When the pre-set length has been reached, the machine will stop coiling, and the coiling head will contract vertically and raise up without hurting coil.
4.2.3.The size of coiling head is fixed and made as buyer's request.
4.2.4.If you want to change the I.D of your coil, You will need to change another size of coiling head.
4.3.Traverse:
4.3.1.A computerized system is used in the traversing system.
4.3.2.Ball screw traverse is driven by a Delta 400W servo motor + Delta Servo driver. A precise encoder sends the coiling signal from coiling motor to servo motor to obtain a perfect synchronization in traversing pitch with that of coiling head.
4.4.Cutter:
4.4.1.Gate type cutter will cut out wire automatically when the pre-set length is reached after the coiling head has complete stop.
4.4.2.A pneumatic cylinder drives double cutting knife.
4.4.3.Cutter material: High quality SKD11 steel with heat treatment.
4.5.4 arms carrier: ( Optional )
4.5.1.After finishing coiling a coil, the 4 arm carriers will hold the coil tightly and transmit the coil to working plate.
4.5.2.After the coil has been moved out, the wire feeding rod will send wire to coiling section for continuous coiling immediately.
4.6.Control Panel:
4.6.1.A man-machine interface (M.M.I) is used for operation.
4.6.2.By touching the screen, you can easy to control and use this machine.
4.6.3.Input the items of wire diameter, Height, start point, total length etc on the screen, then press save to create a new coiling type.
4.6.4.Capacity of coiling types: 100 types.
4.6.5.The PLC control system controls current speed, current length, alarm,line speed adjusting, length counter, coil totalizer, running indicating light, pause button and emergency stop.
4.7.Motors:
4.7.1. Coiling system: 7.5 HP×4PAC Motor + Inverter.
4.7.2. Traversing system: Delta 400W servo motor + servo driver.
5. Feature:
It is possible to feed wire through the application of paying out machine or the direct connection to the extruder; the wire coil output is about 4 times than that of the manual winding (take the 200M-long wire coil as an example); After the coiling, it is possible to connect with the automatic glue film winding machine, and automatically pack the wire coil and processing labels; The output of automatic glue film winding is about 7 times higher if the automatic winding is applied; The servo motor winding displacement is applied in this machine, the wire coil is neater and more artistic if compared with the manual winding; the touch screen man-machine interface operating panel is applied to enable the operation to be more cordial and easy to operate; 99 kinds of different wire coil specification can be stored in the microcomputer. If the product specifications need to be changed, the only thing you need to do is to read the stored specification data, and there is no need to input again. Thus, the production can be started right away; This machine can automatically detect errors, and send out alarms to warn operator if something is wrong with the machine.
Model | Height H (mm) | Outside Diameter O.D ( mm ) | Inside Diameter I D (mm) | Wire/Cable Diameter (mm) | speed (100M / Coil) (Max.) | Average output ( 100M / Coil ) |
C1246 | 40-120 | Ø200-Ø460 | Ø140-Ø220 | Ø 1 - Ø 12 | 500M/min | 2.5Coils/Min. |
Address:
Changzhou City, Jiangsu Province, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Jiangsu Handing Machinery Co., Ltd. is a private enterprise which was established in May 2002 (abbreviationHD), meanwhile, it was founded with the spreading of reform and opening up of China. It was an unknown enterprise locating in Nanxiashu Town Changzhou City Jiangsu Province in the earlier time and owned dozens of employees, however, it has become famous with the deepening insight of the enterprise and by absorbing excellent talents in different fields. Meanwhile, it is an enterprise that develops to be competent for independent research and innovation, offers new type of machines featuring with high productivity and efficiency and durability for the international wire, cable, special cable and data cable manufacturing industry and gradually keep touch with the globally well-known enterprises in the industry of manufacturing wire, cable, special cable and data cable.
In 1995
Enter the wire, cable and date cables machinery manufacturing industry in September, 1995.
In 2002
Founded Iangsu Changzhou Handing Electrical Machinery Factory in May, 2002.
In 2006
Founded Jianxi Handing Electrical Machinery Co., Ltd. In March, 2006.
In 2007
Founded New Longding Precision Machinery Factory in May, 2007.
In 2008
Renamed to Jiangsu Handing Machinery Co., Ltd. In December, 2008.
Founded Anhui Wuwei Customer Service Center in December, 2008.
In 2009
Founded Tianjin Customer Service Center in May, 2009.
Founded Jiangsu Wuxi Customer Service Center in May, 2009.
Founded Jiangsu Yangzhou Customer Service Center in May, 2009.
Founded Sichuan Chengdu Customer Service Center in June, 2009.
In 2010
Founded Liaoning Shenyang Customer Service Center in May, 2010.
In 2011
Founded Wuhan Customer Service Center in May, 2011.
In 2012
Founded Qingdao Customer Service Center in June, 2012.
In 2013
Founded Zhejiang Taizhou Customer Service Center in July, 2013.
In 2014
Founded Xian Customer Service Center.
Founded Changsha Customer Service Center.
In 2015
Achieve an annual output value of 200 million.
Fujian Customer Service Center
In 2016
Achieve an annual output value of 230 million.