630mm hing speed double layer wrapping machine
The machire is vertical double-layer wrapping machine. Take the taping(paper belt and aluminum foil)passed turntable rotary wrapping to core wire, with double wrapping head, to carry out secondary wrapping to the right and left respectively. In addition, it is mainly used for the mica tape wrapping of wire, power cable, control cable, optical cable and insulation wire cores. The fireproof wire and cable are mainly used in power plant, airport, high rise building, metro, underground street, entertainment place and other places. The requirements of fireproof wire and cable have been increasing, thus, the appearance of muIti-head fireproof wire and cable wrapping machine offers all new professional equipment for different wire and cable plants.
The machine is double-head wrapping and transmitted by A. C. Motor with belt. The rotation of a pair of bevel gear by gear makes the lapping disk rotate to the right and left direction. The core wire rotates by leading wheel with two wrapping and then carries out secondary wrapping to the wrapping belt on the core wire in order to reach the purpose of secondary wrapping. The speed of leading wheel can be changed by adjusting continuous variable speed transmission to meet the demand of different lapping pitches. The wrapping machine with single head, double-head or three-head can be produced according to the requirements of the customs.
|Model||HD-φ 630mm||HD -φ 800mm|
|Application||Used for copper or wire and cable surface center taping. Such as: Cotton paper, zona pellucida, fire-proof paper, aluminum foil, drawing tape etc.||Used for copper or wire and cable surface center taping. Such as: Cotton paper, zona pellucida, fire-proof paper, aluminum foil, drawing tape etc.|
|Lapping pitch||Motor adjustable (According to the wire big and small freely adjustable)||Motor adjustable (According to the wire big and small freely adjustable)|
|Suitable for wire diamete||φ 0.6-φ 15mm(Soft structure)(Hard structure below 10mm 2 )||φ 0.6-φ 15mm(Soft structure)(Hard structure below 10mm 2 )|
|Suitable for belting bobbin wire diameter||Outer diameter φ 250-φ 300mm inner hole φ 50mm||Outer diameter φ 250-φ 300mm inner hole φ 50mm|
|Taping tension||Special spring adjustable||Special spring adjustable|
|Take-up bobbin diameter||Outer diameter φ 630mm× Outer width475mm× inner width400mm× shaft holeφ 56mm||Outer diameter φ 800mm× Outer width600mm× inner width500mm× shaft holeφ 80mm|
|Motor power||Three phase 380V 1.5KW frequency conversion speed regulation||Three phase 380V 1.5KW frequency conversion speed regulation|
|Capstan motor||0.75KW Reducer motor(Taiwan Chengbang)||0.75KW Reducer motor(Taiwan Chengbang)|
|Taping rotate speed||2500 rev/min||2500 rev/min|
|Pay-off bobbin||φ 400-φ 630mm(Customer supply size)||φ 800mm|
|Take-up bobbin||φ 400-φ 630mm(Customer supply size)||φ 800mm|
|Take-up device||Torque motor 10N. m||Torque motor 20N. m|