Vertical three layer wire wrapping machine
This is a vertical three layer wrapping machine, take the wrapping (paper belt and aluminum foil) by belt turn table rotation to wrapping is on the core wire and it owns three wrapping heads to carry out wrapping of three times to the right, middle and left respectively. In addition, it is mainly used for the mica tape wrapping of wire, power cable, control cable, optical cable and insulation wire cores. The fireproof wire and cable are mainly used in power plant, airport, high-rise building, metro, underground street, entertainment place and other places. The requirements of fireproof wire and cable have been increasing, thus, the appearance of multi-head fireproof wire and cable wrapping machine offers all new professional equipment for ifferent wire and cable plants.
The machine is double-head wrapping and transmitted by A.C. motor with belt. The rotation of a pair of bevel gear by gear makes the lapping disk rotate to the right and left direction. The core wire rotates by leading wheel with two wrapping and then carries out secondary wrapping to the wrapping belt on the core wire in order to reach the purpose of secondary wrapping. The speed of leading wheel can be changed by adjusting continuous variable speed transmission to meet the demand of different lapping pitches. The wrapping machine with single head, double-head or three-head can be produced according to the requirements of the customs.
|Application||Used for copper or wire and cable surface center taping.Such as:Cotton paper, zona pellucida,fire-proof paper,aluminum foil,drawing tape etc.||Used for copper or wire and cable surface center taping.Such as:Cotton paper, zona pellucida,fire-proof paper,aluminum foil,drawing tape etc.|
|Lapping pitch||Motor adjustable (According to the wire big and small freely adjustable)||Motor adjustable (According to the wire big and small freely adjustable)|
|Suitable for wire diamete||φ0.6-φ15mm(Soft structure)(Hard structure below 10mm 2 )||φ0.6-φ15mm(Soft structure)(Hard structure below 10mm 2 )|
|Suitable for belting bobbin wire diameter||Outer diameter φ250-φ300mm inner hole φ50mm||Outer diameter φ250-φ300mm inner hole φ50mm|
|Taping tension||Special spring adjustable||Special spring adjustable|
|Take-up bobbin diameter||Outer diameter φ630mm×Outer width475mm×inner width400mm×shaft holeφ56mm||Outer diameter φ800mm×Outer width600mm×inner width500mm×shaft holeφ80mm|
|Motor power||Three phase 380V 1.5KW frequency conversion speed regulation||Three phase 380V 1.5KW frequency conversion speed regulation|
|Capstan motor||0.75KW Reducer motor(Taiwan Chengbang)||0.75KW Reducer motor(Taiwan Chengbang)|
|Taping rotate speed||2500 rev/min||2500 rev/min|
|Pay-off bobbin||φ400-φ630mm(Customer supply size)||φ800mm|
|Take-up bobbin||φ400-φ630mm(Customer supply size)||φ800mm|
|Take-up device||Torque motor 10N.m||Torque motor 20N.m|